GPS弹道修正引信机电安全系统与起爆控制技术研究

通过对GPS和DSP技术以及国内外引信安全系统发展状况的分析,提出了在GPS弹道修正引信中应用GPS定位功能和DSP快速信号处理、高精度定时功能等较成熟的机械电子技术来实现GPS弹道修正引信机电安全系统和引信起爆的控制。     

基于Web的《机械加工工艺基础》网络课程研制

从网络课程的基本要求出发,在论述<机械加工工艺基础>网络课程设计原则的基础上,对该网络课程进行了论证和设计,包括网络课程的内容设计、结构设计、教学页面设计、导航设计及交互设计等.     

极性基团对环氧树脂基体力学性能及吸水特性的影响

研究了CYD- 128/THPA/DMP- 30 (CTD)、TDE- 85/THPA/DMP- 30(TTD)、CYD- 128/IPDA(CI)与TDE- 85/IPDA (TI)4种环氧树脂基体浇铸体的拉伸、弯曲和耐海水性能,分析了树脂、固化剂类型和分子结构对树脂基体性能的影响.结果表明,使用相同固化剂时,TDE...     

机械系统可靠性设计若干问题探讨

机械系统的可靠性设计是当前可靠性工程界面临的热点和难点问题之一,从分析机械系统可靠性设计的特点和难点入手,探讨了机械系统可靠性建模、分配、预计等机械系统可靠性设计中急需解决的关键问题。     

初始和终止库存不为零的生产与库存问题

针对初始库存和终止库存不为零的生产与库存问题,通过适当设置需求量,将其化为初始库存和终止库存为零的问题,以便应用重生性质进行求解。     

921A钢在海水中腐蚀的力学化学效应

为了研究弹性应力和弹塑性应变对921A船体钢在模拟海水中腐蚀行为的影响,采用自制的载荷-电化学实验装置对921A钢在载荷与腐蚀介质协同作用时的开路电位、动电位极化曲线和电化学阻抗谱等电化学性能进行了测试,并由电化学阻抗谱拟合得到的电荷传递电阻定义载荷下的腐蚀速率修正因子,将实验得到的腐蚀速率修正因子与理论值进行了对比。结果表明:弹性拉应力与弹性压应力对力学化学效应的影响具有对称性。力学化学效应随着弹性应力的增大而增大,随着弹塑性应变的增大先增大后减小。弹塑性应变对力学化学效应的影响远远大于弹性应力的影响。在研究范围内,弹塑性应变引起的腐蚀电位负移量最大为62.6 mV,相应的腐蚀速率修正因子高达4.113,而弹性应力引起的腐蚀电位负移量最大为24.5 mV,相应的腐蚀速率修正因子为1.746。由此可见,应力应变对921A钢在海水中腐蚀行为的影响不容忽视。     

聚(2-甲氧基-5-丁氧基)亚苯基亚乙烯的合成及电性能

本文用对甲氧基苯酚、正溴丁烷、聚甲醛为原料， 经醚化， 双氯甲基化和碱性消除反应， 合成出长链共轭且可溶的聚（２甲氧基５丁氧基）亚苯基亚乙烯，用 Ｉ Ｒ 和１ Ｈ Ｎ Ｍ Ｒ 表征了中间体和聚合物的结构，并测定了聚合物的伏—安特性曲线。     

Convolutions and generalization of logconcavity: Implications and applications

Additive convolution of unimodal and α‐unimodal random variables are known as an old classic problem which has attracted the attention of many authors in theory and applied fields. Another type of convolution, called multiplicative convolution, is rather younger. In this article, we first focus on this newer concept and obtain several useful results in which the most important ones is that if is logconcave then so are and for some suitable increasing functions ?. This result contains and as two more important special cases. Furthermore, one table including more applied distributions comparing logconcavity of f(x) and and two comprehensive implications charts are provided. Then, these fundamental results are applied to aging properties, existence of moments and several kinds of ordered random variables. Multiplicative strong unimodality in the discrete case is also introduced and its properties are investigated. In the second part of the article, some refinements are made for additive convolutions. A remaining open problem is completed and a conjecture concerning convolution of discrete α‐unimodal distributions is settled. Then, we shall show that an existing result regarding convolution of symmetric discrete unimodal distributions is not correct and an easy alternative proof is presented. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 109–123, 2016     

整体缝合夹芯结构复合材料力学性能

所设计的新型整体缝合泡沫夹芯复合材料结构,能够避免一般斜缝方式引起纤维交叉损坏的弊端。采用真空导入模塑工艺制备整体缝合泡沫夹芯结构复合材料,研究缝合结构、缝合方式以及缝合纱线用量对整体缝合泡沫夹芯复合材料平压力学性能和弯曲性能的影响。结果表明,新型缝合结构在保证平压力学性能的同时,相比于垂直缝合结构弯曲破坏载荷提高了94.4%;穿透缝合方式能够显著提高试样的平压强度和弯曲破坏载荷;随着缝合纱线用量的增加,整体缝合泡沫夹芯复合材料的压缩和弯曲性能显著提高。     

Kevlar fabric reinforced polybenzoxazine composites filled with silane treated microcrystalline cellulose in the interlayers: The next generation of multi-layered armor panels

The design of astonishing combinations of benzoxazine resins with various fillers is nowadays of great interest for high quality products, especially in ballistic armors. The objective of this study is to investigate a new hybrid material prepared as multi-layered composite plate by hand lay-up technique. Different composites were manufactured from Kevlar fabrics reinforced polybenzoxazine, which was filled with silane treated microcrystalline cellulose (MCC Si) at various amounts in the interlayers. The developed materials were tested for their flexural, dynamic mechanical and ballistic performance. The aim was to highlight the effect of adding different amounts of MCC Si on the behavior of the different plates. Compared to the baseline, the dynamic mechanical and bending tests revealed an obvious decrease of the glass transition of 21 °C and a notable increase in storage modulus and flexural strength of about 180 %and17%, respectively, upon adding 1% MMC Si as filler. Similarly, the ballistic test exhibited an enhancement in kinetic energy absorption for which the composite supplemented with 1% MCC Si had the maximal energy absorption of 166.60 J. These results indicated that the developed panels, with interesting mechanical and ballistic features, are suitable to be employed as raw materials to produce body armor.